Resident Building Services Engineer (RBSE) at China State Construction Engineering (Hong Kong) Limited

Job Description:

Latest job information from China State Construction Engineering (Hong Kong) Limited for the position of Resident Building Services Engineer (RBSE). If the Resident Building Services Engineer (RBSE) vacancy in Hong Kong matches your qualifications, please submit your latest application or CV directly through the updated Jobkos job portal.

Please note that applying for a job may not always be easy, as new candidates must meet certain qualifications and requirements set by the company. We hope the career opportunity at China State Construction Engineering (Hong Kong) Limited for the position of Resident Building Services Engineer (RBSE) below matches your qualifications.

China State Construction Engineering (Hong Kong) Limited (“the Company” or “China State Hong Kong”) started its construction business in Hong Kong in 1979. The Company engages in building construction and civil engineering works. China State Hong Kong is among the largest construction contractors in Hong Kong, and is approved by the Works Bureau to be on the List of Approved Contractors (Group C) for Public Works in the five major categories of building and civil engineering works, namely, “Buildings”, “Port Works”, “Roads and Drainage”, “Site Formation” and “Waterworks”.

• Supervise Building Services Inspection Team for the participation of mock‑up inspections (e.g. Timber mock‑up, Sample flat inspection, etc.) and factory inspections (e.g. LV switchboard acceptance tests, Open‑up flush water pump test, Open‑up to panel wall, etc.) and lead the Building Services Inspection Team to coordinate with Specialist Sub‑contractors for carrying out any necessary works;
• Oversee, inspect, test and examine the materials used, workmanship, installation method and procedure employed by the Contractor for all building services works, including works manufactured / fabricated off‑site with the assistance of the site supervisory staff;
• Check and endorse the materials used and workmanship employed by the Contractor for all building services works are in compliance with the Client’s Requirements, the Specification, approved drawings, Approved Design and construction procedures and testing and commissioning procedures;
• Check and ensure only the approved drawings are used for installation / construction;
• Identify defective or‑standard building services works, materials and workmanship which do not comply with the Client’s Requirements, the Specification, approved drawings, Accepted Design, construction procedures and testing and commissioning procedures, and co‑ordinate and witness the performance of appropriate tests and remedial works on the defective or sub‑standard building services works;
• Review, validate and endorse the T&C reports, shop drawings, materials, samples, method statements, etc. submitted from the Contractor;
• Provide comments to the T&C reports, shop drawings, materials samples, method statements, etc. and arrange necessary rectification works;
• Coordinate with Building Services Design Team on the necessary defect rectification works;
• Communicate amongst, including but not limited to, the Building Services Design Team, the Contractor, CM, the site technical staff, the Building Services Engineer(s) employed by the Contractor, the Specialist Sub‑contractors, etc. on building services related matters, in connection with the Site Agent on builder’s work and RSS on other disciplines;
• Resolve and report design or installation problems or site difficulties in building services works on Site arising from unforeseen circumstances;
• Coordinate with the Contractor, his domestic sub‑contractors and/or Specialist Sub‑contractors to identify clashes, conflicts between different building services sub‑trades and structure etc., and resolve the associated site problems;
• Identify inspection activities in particular for covered‑up works, works put out of view and types of inspection work that must be completed before associated works by other parties (i.e. builder’s work). Establish inspection schedule with the assistance of the Building Services Inspection Team for on‑going monitoring;
• Communicate and liaise with relevant parties to ensure the works are carried out in accordance with the accepted installation programme and drawings;
• Comment and monitor the installation programme submitted by Specialist Sub‑contractors with reference to the Master Programme;
• Monitor the progress of work, follow up on outstanding items and remedial actions by the Contractor and produce timely information in advance of construction /installation to avoid delay;
• Communicate with the CM and submit monthly report to the CM on progress and quality of building services works;
• Report to the CM immediately any issues that affect time and quality of the works that require special attention of the CM together with any remedial solution proposed;
• Ensure building services works are performed accordingly to the installation programme with minimum disruption, and in cases of action involving variations to design and potential abortive works, consult the Building Services Design Team and report to the CM;
• Oversee site records on building services works, and co‑ordinate the checking of building services works with the assistance of site supervisory team; (t) Participate in resolving any dispute arising from Utility Undertakings, Building Services Specialist Sub‑contractors, other contractors, Client’s departments, other government departments, etc. on issues relating to building services installations;
• Review and fine‑tune the design and shop drawings with the Contractor to match with the actual site condition;
• Monitor and forecast site supervision resources for building services works and advise the CM on the appropriate planning and action plans to optimise the utilisation of the resources;
• Agree with the Specialist Sub‑contractors on the pre‑requisite items for key inspections e.g. approved drawings, materials / equipment, calibration certificates of testing instrument, etc. in advance of the commencement of relevant work / inspection;
• Monitor, witness and check all the testing and commissioning works and to keep proper record with the assistance of Building Services Inspection Team;
• Monitor the co‑ordination of building services works requirements in connection with builder’s works, report on the consequential changes to the building services design, and produce sketch plans and working drawings and to resolve site problems with design solution;
• Check, supervise and inspect existing building services termination of the whole Site as required in this Contract;
• Provide technical advice upon request for all temporary works, interfacing works, utilities termination, decommissioning and diversion works of the whole Site as required in this Contract;
• Attend regular and ad‑hoc meetings;
• Assist the preparation of design and estimation in compliance with the Specification in collaboration with the allied disciplines;
• Assist the CM in any site investigation, and prepare report on the acceptance or otherwise of the use of materials, installations and testing &; commissioning works;
• Assist in the monitoring and reporting of the performance of the building services Specialist Sub‑contractors;
• Supervise and manage the Building Services Inspection Team;
• Provide input to the preparation of the Quality Plan and, Inspection, Test, and Approval Plans (ITAP), that are submitted by the Contractor to substantiate the fulfilment of Enhanced Quality Supervision and Assurance Plan for building services works, for site supervision and inspection;
• Review, validate and endorse the Quality Plan and, Inspection, Test and Approval Plans (ITAP), that are submitted by the Contractor, to ensure the fulfilment of Building Services Site Inspection Guide (DBSI), all HD’s quality documents, the Client’s Requirements and requirements stipulated in all parts of this Contract;
• Check and ensure only accepted shop drawings and materials / equipment are used for construction;
• Check all documents prepared by the Contractor and/or his Special Sub‑contractors for statutory submissions, utilities submissions, BEAM Plus submission and etc. prior to submission to authorities;
• Witness the T&C of building services installations in accordance with the requirements of this Contract, and ensure all T&C to be conducted with satisfaction before all statutory inspection;
• Attend and coordinate joint inspection and handover meetings with Estate Management Division (EMD) of the HD and other government departments for entrustment works, for the T&C of building services installations;
• Supervise and witness the special tests in accordance with the requirements of this Contract, including but not limited to Bench Test for CABD equipment, as required by the CM;
• Participate in the regular site safety, health and environmental checking and meetings;
• Participate in the site environmental compliance checking;
• Ensure all building services works are in full compliance with the approved safety plan and environmental plan;
• Review and validate all claims submitted by the Contractor and carry out site measurements with the assistance of the Building Services Inspection Team whenever necessary. Prepare assessment on claims and make recommendations as required by the CM;
• Monitor budget and conduct financial forecast, and provide necessary assistance in processing payment and claims;
• Provide support in answering public, press, tenant and government parties inquiries and complaints handling (i.e. CRMS);
• Properly record and maintain all relevant correspondences and documentation of the management systems to meet the requirements of ISO 9001, ISO 14001, ISO 45001 and ISO 50001, as appropriate to conform with HD’s quality standard requirement;
• Lead the Building Services Inspection Team to coordinate with the Contractor and/or his Specialist Sub‑contractors to conduct noise measurement for pump rooms, A/C plant room and emergency generator room (located directly above domestic flats) etc. and ensure the results are in compliance with EPD’s requirements. Remedial proposal should be prepared in case of non‑compliance;
• Lead the Building Services Inspection Team to coordinate with the Contractor and/or his Specialist Sub‑contractors to carry out energy measurement for communal areas of domestic buildings at a prescribed interval (i.e. within one year after completion of domestic blocks and when the mass intake of tenants is mostly completed), in accordance with relevant HD procedural manuals and technical guides. Check and ascertain the points of measurement correspond to the items delineated in the Energy Estimation endorsed by BSDRP(DB2). The RBSE shall refer to the template stipulated in Appendix BS‑09 to this Part D of the Client’s Requirements for the submission of Building Services Energy Measurement Report for Communal Area of Domestic Block to the satisfaction of CM;
• Review handover documents submitted by the Contractor, including but not limited to Operation and Maintenance (O&M) manual, as‑built drawings, design records with calculations, certificates of warranty, test reports and etc. for handover to the future maintenance agents and EMD of the HD;
• Report any incidents / reportable accidents on site to the CM; Undertake any other duties in connection with the site construction activities as and when required by the CM;
• Provide support for mass intake of tenants, inquiries from public, press media, government departments and complaint (i.e. CRMS); and
• Assist to conduct Performance Assessment scoring System (PASS) assessments with the assistance of site staff to measure and evaluate the contractor’s performance during different stages of the Contract; and
• Attend and coordinate with the Contractor and/or his Specialist Sub‑contractors to conduct Performance Assessment Scoring System (PASS) assessments during construction stage.

• Employed by the BSESP as a resident building services engineer in building services engineering inspection;
• A member of a professional institution recognised for corporate membership of the Hong Kong Institution of Engineer (Electrical, Mechanical or Building Services discipline) or equivalent and shall have at least three (3) years relevant post‑qualification local experience.

We offer an attractive remuneration package with comprehensive fringe benefits to the right candidates. Interested parties please send resume with day‑time contact number, expected salary and quoting Ref. No. to Human Resources Manager, 29/F., China Overseas Building, 139 Hennessy Road, Wanchai, Hong Kong or e‑mail / fax to 2528 2840.

Applicants who are not invited within 2 months may consider their applications unsuccessful. All information provided by applicants will be treated in strict confidence and used only for recruitment purposes. Applicants may be considered for other suitable positions within the China Overseas Group and its related companies for a one‑year period, thereafter their personal data will be destroyed.

Serving The Community. Prospering Hong Kong

Referrals increase your chances of interviewing at China State Construction Engineering (Hong Kong) Limited by 2x.

Job Info:

• Company: China State Construction Engineering (Hong Kong) Limited
• Position: Resident Building Services Engineer (RBSE)
• Work Location: Hong Kong
• Country: HK

How to Submit an Application:

After reading and understanding the criteria and minimum qualification requirements explained in the job information Resident Building Services Engineer (RBSE) at the office Hong Kong above, immediately complete the job application files such as a job application letter, CV, photocopy of diploma, transcript, and other supplements as explained above. Submit via the Next Page link below.